Type: High Precision,High Speed Digital Indicator
For:
- High speed weighing applications
- Force, pressure & torque measurements
Features:
- 24 Bit Sigma-Delta A/D converter for high accuracy
- High-speed A/D and D/A conversion at 2000times/sec
- Simulative(mV/V memory) or live load calibration
- Digital linearization function - Low/High limit display
- Low/OK/High Relay contact output
- Hold or peak hold function
- Serial commands to set parameters (max. 32 ID)
- Sensor output check fuction - Isolated analog output (Option 1, 2)
SPECIFICATIONS
Analog signal input range | -34mV ~ +34mV | ||
Non-linearity | 0.01% F.S. max. | ||
Max. display resolution | 1/20,000 | ||
Min. input sensitivity | 0.2μV/Digit (min.) | ||
Temperature drift | Zero : ±0.1μV/°C RTI max. SPAN : 10ppm/°C max. | ||
Load cell excitation | DC 5V, 60mA (350 ohm x 4 load cells) | ||
Input noise | ±0.3μVpp or less | ||
Input impedance | 10MΩ or more | ||
A/D internal resolution | 24 bits | ||
A/D sampling speed | 2,000 times/sec | ||
Display | Measurement | LED, 7 segments 14.1mm high 6 digit | |
High/Low | LED, 7 segments 8.0mm high 5 digit | ||
Maximum display | (-) 19999~(+) 19999 (min. division: 1) (-)199950~(+)999950(min. division:50) | ||
Display speed | 1,000times/sec ~ 1times/sec | ||
Polarity indication (-) | "- " Minus sign | ||
Annunciators | LO, OK, HI, HOLD, ZERO | ||
Display increments | 1,2,5,10, 20, 50 selectable | ||
Decimal points | Selectable to any points | ||
Power source | AC 85 ~ 240V or DC10V ~ 30V | ||
Power consumption | Approx. 20VA | ||
Operating temperature | -10℃ ~ 50℃ | ||
Output | Standard | 0) Relay 3CH output & Serial output RS-232C + RS-485/RS-422 (RS-422 Selectable at front panel) | |
Options | 1) DC 0~±10V Isolated Analog output (User-changeable to DC 0~±5V) 2) DC 4~20mA Isolated Analog output (User-changeable to DC 0~20mA) 3) BCD Parallel output 4) Modbus 485 + Ethernet | ||
Weight | Approx. 700g | ||
Panel Parameter Diagram
Ordering Instructions
