Basic Description

• Installation : Side & Top
• Type : Remote
• Ambient Temp. : -20~+60℃
• Fluid Temp. : Max. 150℃
• Operating Pressure : Up to 10kg/cm2(150#)
• Enclosure : Weather-Proof,IP65
• Applications : Solid
• Length : Std.238mm
• Combination Unit : HLC-901P
                                     HLC-901L

Operation Principle

        The HTM-930 is the simplest structure with innovative and versatile. It consists of a rash coil that generates frequency in the sensor head and a sensitive coil that detects the rash. If the measurement contents do not exist around the detection rod, the detection rod is continuously vibrated due to the oscillation coil. If the contents of the measurement are surrounded by the detection rod, the vibration frequency is greatly reduced, and the output from the sensitivity coil will drop to a very low value. If the signal is input to the unit and the signal is input to the unit, the relay of the unit can be operated to apply to alarms and process control.

Feature

• You can detect a variety of solids or levels of powder.
• It works smoothly at low density or high density powder.
• There is no mechanical drive area, so it has a long life.
• There is no need for sensitivity adjustment according to the measurement.
• It can also be applied to the low weight powder.

Application

• Chemical plant (PP, PE, Nylon Chip ETC.)
• styrofoam

Technical Specification

• Installation: SCREW
• Installation specification: PT 3/4 (m)
• Usage temperature: max. 150 deg.c
• Usage pressure: max. 10 kgf/cm2
• Protection Level: Weather-Proof (IP 65)
• Material: Head - Steel
             Connection —— SUS 304
             Sensing probe —— SUS 316L

Electrical Specification

• Around temperature: -20 deg.c ~ +60 deg.c
• Power: AC 90 ~ 240V 60Hz
• Output: DPDT
• Consumption: 5va
• Contact capacity: AC 250V 5A, DC 30V 5A
• Combination Unit : HLC-901